How to maintain the shears

Maintenance

1. Operate in strict accordance with the operating procedures;

2. Before each start-up, the lubricating oil should be added at fixed time, fixed point fixed quantity according to the lubrication chart, the oil should be clean free of precipitation;

3. The machine tool must always be kept clean the unpainted part of the antirust grease;

4. The lubricating oil in the motor bearing should be replaced filled regularly, the electrical equipment should be checked regularly to see if it is safe reliable;

5. Regularly check whether the V-belt, handle, knob key are damaged. If the wear is serious, it should be replaced in time reported to the spare parts for supplement;

6. Regularly check repair the switch, fuse handle to ensure their reliable operation;

7. 10 minutes before work every day, lubricate clean the machine tool;

8. It is strictly forbidden for non designated personnel to operate the equipment. Normally, people must leave the machine stop.