X-Q42 series precision bar shearing machine production line

The X-Q42 Series bar shearing machine production line produced by our company is an ideal cutting equipment for high-efficiency cold hot cutting bars in bearing, forging, automobile, metallurgy, petroleum other industries. It is mainly used for the blanking of die forgings, roll forgings cold warm extrusion parts. The cutting process of less cutting no cutting raw materials is adopted. The equipment has the advantages of low energy consumption, high efficiency low material consumption This series of products have reliable performance convenient maintenance. It is an ideal shearing equipment for bearing, forging, metallurgy other industries. It is also an energy-saving material saving equipment promoted by the state.

The production line of X-Q42 Series bar shearing machine mainly includes the following structures:

1. Automatic feeding, feeding mechanism, feeding system includes automatic feeding automatic feeding. The automatic feeding part includes a material storage machine, a sliding material rack an automatic turning material feeding device;

2. Main engine part: the rectification of the main engine includes automatic cutting, automatic lubrication of the main engine, automatic alarm of insufficient air pressure, automatic alarm of oil shortage of automatic lubrication, automatic alarm of oil pipeline blockage;

The frame is an integral welded steel plate structure with sufficient strength rigidity. A quick tool changing mechanism is set on the left side of the machine frame. When replacing the blade bolt, first turn the nut, loosen the blade bolt, rotate it for an angle, pull the bolt outward to make the head shrink into the base plate, then the lower blade can be pulled out the left side of the machine tool to realize quick change;

3. Automatic pressing mechanism: the pressing mechanism is driven by air cylinder, which can effectively fix the bar on the shearing die base by using the pressure boosting principle of the force increasing eccentric pressing mechanism, so as to improve the shearing precision quality of the bar, the action of the pressing mechanism is sensitive reliable;

4. The bar cutting machine adopts two pole upper transmission;

5. Lubrication system: lubrication is an important means to ensure the normal operation of equipment avoid unnecessary grinding damage of various parts. The lubrication system includes electric centralized lubrication manual decentralized lubrication. The lubrication time is controlled by PLC;

6. Sizing mechanism: the sizing mechanism can determine the length of the material to be cut. According to the process requirements of the material, preliminarily determine the size of the retaining material for trial cutting, check whether the cutting weight meets the process requirements, adjust it until it is appropriate;

7. Automatic shear electrical system: according to the automation requirements, the production line needs to reconfigure the electrical system, mainly including the detection control of each action signal transmission. The PLC is mainly used for centralized intelligent control to realize command the cooperation of various organizations to achieve the purpose of automatic shearing; the system adopts MITSUBISHI PLC of Japan, High quality electrical components, long life, stable reliable performance.

X-Q42 Series bar shearing machine production line has the following characteristics,

1. The main frame is an integral welded structure with enough strength rigidity.

2. The transmission is two-stage up drive, stable transmission low noise.

3. The sliding block adopts rectangular inlaid steel guide rail, which has good wear resistance good precision retention.

4. Side draw type quick change blade mechanism, safe, quick labor-saving.

5. Combined pneumatic friction clutch brake, flexible reliable operation, convenient maintenance.

6. The pressure increasing pressing mechanism has large pressing force is safe reliable.

7. This series of products have automatic feeding, automatic cutting automatic counting. At the same time, it has the functions of automatic alarm of insufficient air pressure, abnormal lubrication display alarm, material blocking protection, etc.

8. The minimum shear length is 50 mm;

9. Only one person is required to be on duty for the whole line, which saves labor reduces labor force;

10. The transmission is a two-stage up drive with stable transmission low noise;

11. The slope of cold shear section ≤ 3 °;

12. Weight error ± 0.5%;

The main parameters of X-Q42 series precision bar shearing machine production line are as follows:

Q42 series precision bar shearing machine production line:

The X-Q42 Series bar shearing machine production line produced by our company is an ideal cutting equipment for high-efficiency cold hot cutting bars in bearing, forging, automobile, metallurgy, petroleum other industries. It is mainly used for the blanking of die forgings, roll forgings cold warm extrusion parts……