Contact: Li Shijun (13940547998) with wechat
Contact: Li Ying (15502475265) with wechat
Tel: 024-25870279
Fax: 024-25870279
E-mail: 1412909433@qq.com
Postcode: 110025
Address: No.28-1, Zhenxing 7th Street, Hutai new town, Shenyang, Liaoning Province
Sales address: Gate 3, No. 32, Baogong North Street, Tiexi District, Shenyang City, Liaoning Province
website: en.sywhddy.com
Common troubleshooting of hydraulic plate shears
1. Ask the equipment operator to understand the operation status of the hydraulic system of the plate shears. It includes: whether the hydraulic system of the shear works normally; whether the hydraulic pump has abnormal phenomenon; the time result of the hydraulic oil detection cleanliness; the cleaning replacement of the filter element; whether the hydraulic components have been adjusted before the fault; whether the sealing elements have been replaced; what abnormal phenomena have occurred in the hydraulic system of the shear before after the fault; what faults have occurred in the system in the past It is necessary to understand one by one.
2. Look at the actual working condition of the hydraulic system of the shear, observe whether there are problems in the pressure, speed, oil, leakage vibration of the system.
3. Listen to the sound of the hydraulic system of the shear, such as: impact sound; pump noise abnormal sound; judge whether the hydraulic system works normally.
4. Touch the temperature rise, vibration, crawling the tightness of the joint to determine whether the working state of the hydraulic system of the shear is normal.
